The most natural approach to regulating a home is through wall switches. On the other hand, using a remote control is the ideal method to move that functionality around your home. The Aeotec Wallmote Quad version functions as a wall switch and remote control for Z-Wave home automation. Using the included wall mount, you may install Wallmote to any wall in your house to use it as a wall switch. It is powered by a rechargeable battery. Because it is magnetically attached to its wall mount, you can detach it at any time to use Wallmote as a remote control in any room of your house and then quickly reattach it to the wall.
Wallmote has a simple design that blends in with any home’s decor and allows you to directly control eight Z-Wave scenes, each of which may save the settings for more than 15 different Z-Wave devices. Aeotec Wallmote Quad manual provides instructions on how to use it. Just tap on Wallmote’s touch-glass surface to change or enable a scene. Wallmote is a delicate 3.02 inches wide and 0.37 inches deep. It utilizes Z-Wave Plus and Aeotec’s Gen5 technology, and its battery life is around three months before it needs to be recharged using the included USB cord.
Built on state-of-the-art Z-Wave Plus chips, Aeotec Wallmote Quad may be utilized anywhere in your house and has a fine-tuned antenna that can communicate across an open range of more than 100 meters (382 ft).
Wallmote can control your entire home, so you may not be present to see these changes when you dial the Wallmote Quad’s touch glass. However, you’ll notice a difference. The haptic engine of the Wallmote Quad provides a click-like confirmation of each action you take.
Wallmote Quad is powered by a rechargeable lithium battery made for cellphones. Thus there is no need to change a battery. It may also be recharged via the supplied micro USB cord, precisely like a smartphone.
Not only is the Wallmote Quad portable, but it is also wonderfully balanced. Only 7.7cm wide and 1.9cm deep, the Aeotec Wallmote Quad has a sleek, modern style (3.0 x 0.4 inches).
With Z-Wave technology, Wallmote Quad may be programmed to automate your house. You can use your gateway to group Z-Wave and other linked devices, then use Wallmote Quad to turn them on.
Wallmote is ideal no matter the space or the wall. The wireless Z-Wave wall switch only requires a small amount of double-sided tape to install anywhere on any wall. All you have to do is unpack it, stick then charge it. It only takes a tap to control. You can use special mounting adhesive to attach the mounting plate to any wall or surface to install Wallmote Quad. It will magnetically attach when you set it in front of the mounting plate.
The Aeotec Wallmote Quad can control anything your Z-Wave gateway controls because it communicates with it directly. You have access to up to 4 settings per button on the Wallmote Quad, allowing you to manage up to 16 devices or scenarios around your home.
Wallmote was created using the most recent Z-Wave Plus technology as part of Aeotec’s Gen5 line of Z-Wave products. This most modern battery-powered wall switch is designed with cutting-edge performance and security.
Wallmote and Wallmote Quad can get wireless firmware upgrades via Z-Wave Plus, keeping them both up-to-date.
Aeotec Wallmote Quad is compatible with the Ezlo Atom, Plug Hub, Ezlo Plus, and Ezlo Secure products, which helps improve the efficiency of the Aeotec Wallmote quad.