The AEOTEC Water Sensor 7 Pro is a sensor that measures temperature and humidity in addition to checking water leaks. It is also simple to retrofit the sensor. Because of its slender design, the AEOTEC Water Sensor 7 Pro may be mounted in any bathroom, below a kitchen sink, or in any other small space. Simply mount the sensor to the wall, and place the sensor probe on the ground. The device will report on any substantial change using the inbuilt temperature and humidity sensor. The device can be added or removed by three consecutive clicks on the tamper button. On the other hand, the device may be activated with just one click of the button. The gadget supports authorized and unauthenticated network keys for the Z-Wave Security S2 framework.
leak detection: When leaks develop where they shouldn’t, they serve as the foundation for high expenses and significant damages. The Aeotec Water Sensor 7 Pro lives up to its name by sensing the absence of water in addition to its presence. When used to monitor tanks or pits, the Aeotec Water Sensor 7 Pro can inform you when water levels drop and start automated processes.
Leak protection: The Aeotec Water Sensor 7 Pro does not only keep track of water leaks. It can take preventative action to help reduce the amount of damage brought on by drips, bursts, leaks, or other water flows once it is connected to your Z-Wave automation system. For instance, the smart device may tell smart water valves and those on the mains pipe to close in the case of a pipe rupture.
Heat management: The Aeotec Water Sensor 7 Pro continuously measures the temperature in your room To manage and control linked heating or cooling systems.
Air quality control: The Aeotec Water Sensor 7 Pro monitors your space’s ambient temperature and relative humidity. The smart device may be used to autonomously regulate the air quality in space by turning on humidifiers, extractor fans, and dehumidifiers with real-time humidity sensing.
With the use of wirelessly coupled technologies like water cut-off valves, the Water Sensor 7 Pro spot sensor can find drips and leaks and prevent water damage. Using Z-Wave Plus, the Aeotec Water Sensor 7 has been designed as a safety sensor to aid in the detection and prevention of floods and water leaks. It is driven by the S2 framework and Gen7 technology from Aeotec. Water Sensor 7 Pro has been created as an install-and configure technology with five years of battery life. It is built on Gen7 and 700 series Z-Wave.
Temperature, humidity, and air analysis for potential mold spores are the optional automation technologies offered by the Pro model. In order to effectively control and safeguard these technologies, Water Sensor 7 Pro has been specifically created for usage in moist areas like restrooms.
Aeotec water sensor 7 pro is compatible with the Ezlo Atom, Ezlo Atom, Plug Hub, Ezlo Plus, and Ezlo Secure products, which helps improve the efficiency of the Aeotec water sensor 7 pro.